Supply of Various Chemicals

DFP supply various range of chemicals such as:

  • Glycol TEG
  • Methanol
  • Sodium Hypochlorite Meg
  • AR-AFFF FOAM 3% and AFFF FOAM 2%, 3%


Triethylene glycol, TEG, or triglycol is a colorless odorless viscous liquid with molecular formula HOCH2CH2OCH2CH2OCH2CH2OH. It is used as a plasticizer for vinyl polymers. It is also used in air sanitizer products, such as “Oust” or “Clean and Pure”. When aerosolized it acts as a disinfectant. Glycols are also used as liquid desiccants for natural gas and in air conditioning systems. It is an additive for hydraulic fluids and brake fluids and is used as a base for “smoke machine” fluid in the entertainment industry.



TEG is used by the oil and gas industry to “dehydrate” natural gas. It may also be used to dehydrate other gases, including CO2, H2S, and other oxygenated gases. It is necessary to dry natural gas to a certain point, as humidity in natural gas can cause pipelines to freeze, and create other problems for end users of the natural gas. Triethylene glycol is placed into contact with natural gas, and strips the water out of the gas. Triethylene glycol is heated to a high temperature and put through a condensing system, which removes the water as waste and reclaims the TEG for continuous reuse within the system. The waste TEG produced by this process has been found to contain enough benzene to be classified as hazardous waste[3] (benzene concentration greater than 0.5 mg/L).


Methanol, sometimes called “wood alcohol,” is a clear liquid with the chemical formula CH3OH. It is clear liquid with polar properties, making it a good solvent. It is also highly flammable, and highly toxic to humans if ingested.


Methanol is used industrially as an ingredient in antifreeze, various chemical solvents, certain fuels, the creation of many plastics, and in blends of alcohol intended for medical or industrial use instead of consumption.

Methanol can be used to make other useful solvents including acetic acid, dimethyl ether, and propylene, which is used in anti-freeze. Methanol itself can also be an ingredient in anti-freeze.


The consumer of sodium hypochlorite requires an understanding of the product from a chemical and handling prospective.

The information below is a brief summary of the product and is intended to assist the consumer to buy the best product, and to store and handle it correctly.

Cl2                 + 2 NaOH                   = NaOCl                 + NaCl               + H2O

Chlorine   Sodium Hydroxide   Sodium Hypochlorite   Sodium Chloride     Water

In various parts of the world, sodium hypochlorite strength is identified using five common definitions that result in different numbers for the answer although the oxidizing power is the same, i.e. the sodium hypochlorite strength is the same. Although there are other definitions used, due to the infrequency of use.



 AR-AFFF FOAM 3% and AFFF FOAM 2%, 3%

Every type of foam has its application. High-expansion foams are used when an enclosed space, such as a basement or hangar, must be quickly filled. Low-expansion foams are used on burning spills. AFFF is best for spills of jet fuels, FFFP is better for cases where the burning fuel can form deeper pools, and AR-AFFF is suitable for burning alcohols. The most flexibility is achieved by AR-AFFF or AR-FFFP. AR-AFFF must be used in areas where gasolines are blended with oxygenates, since the alcohols prevent the formation of the film between the FFFP foam and the gasoline, breaking down the foam, rendering the FFFP foam virtually useless.